ROBO-8114VG2AR

8/9th Gen Intel® Xeon® E/Core™ processor based PICMG 1.3 full-size single board computer

×

1

2

❮ ❯

Features

8/9th Gen Intel® Xeon® E/Core™ i processors in LGA 1151 package
Delivers up to128GB(Non-ECC) maximum DDR4 2133 ECC SO-DIMM on four SO-DIMM sockets
Mutiple display by DVI-I(DVID+VGA) and HDMI
High speed dual Gigabit Ethernet based on PCI express x 1, high bandwidth I/O interface
Rich I/O connections such as four serials ports, USB 3.0/2.0, SATA III ports
On board TPM2.0

Documents & Downloads

ROBO-8114VG2AR is based on Intel^®C246 chipset with workstation processor or Intel^® Q370 chipset with desktop level processor. Built with flexible PCI express expansions, ROBO-8114VG2AR is suitable for Medical, Industrial Automation, and Digital Signage applications.

Specification
CPU	Intel® Xeon® E series / 8th/9th Gen Core™ i3/i5/i7 processors up to 3.6 GHz (35~95W) in LGA1151 package Intel® Turbo Boost, Hyper-Threading, Virtualization, Thermal Monitoring, Trusted Execution, and SpeedStep Technology (depending on processor SKU)
Technology	x86
Chipset	Intel® C246 / Q370
Memory	Dual-channel DDR4 2133 (ECC/non-ECC) SDRAM on four 260-pin SO-DIMM sockets, up to 128GB (With Non-ECC)
USB	4x USB 2.0 through backplane, 480Mbps bus capable of high/full/low-speed data ranges 8x USB 3.2 Gen 1 on board, 5Gbps bus capable of high/full/low-speed data ranges 2x USB 3.2 Gen 2 on bracket, 10Gbps bus capable of high/full/low-speed data ranges
Serial Interface	2x RS232 ports 2x RS232/422/485 selectable LPC to COM port IC Fintek F81216DG
Expansion	From CPU 1x PCIe x16 or 2x PCIe x8 or 1x PCIe x8 + 2x PCIe x4 selectable by jumper setting (Gen3 up to 8.0 GT/s) From PCH 1x PCIe x4 or 4x PCIe x1 (Gen 3 up to 8.0 GT/s) 4x PCI devices at 32bit 33MHz
Network	Intel® WGI219LM + WGI225LM Gigabit Ethernet Controller, Dual 10BASE-T / 100BASE-TX / 1000BASE-T Ethernet, Dual RJ-45 connector with two LED indicators
Audio	Intel® PCH built-in High Definition Audio up to 192-kHz 32-bit, Realtek ALC886-GR HDA codec, 5.1 channels, 1x on- board audio pin header
Graphic Controller	- Intel® UHD Graphics 630 Provides improved 3D multimedia capabilities including Microsoft DirectX 12, OCL 2.x and OpenGL 4.3/4.4
Display Interface	VGA on bracket, resolution up to 1920x1200 @ 60Hz DVI-D on bracket, resolution up to 1920x1200 @ 60Hz (VGA + DVI-D on bracket by DVI-I port) HDMI on board, up to 4096x2160 @ 24Hz
GPIO	On board programmable 8-bit Digital I/O
Firmware	AMI UEFI BIOS (SPI ROM)
Storage	5x SATA 3.0 ports (Dual ports via Backplane) Supports RAID 0, 1, 5, 10 1x M.2 Type M 2280 (On bottom side)
Power Requirement	Typical +12V, +5V, Supports ATX mode
Operating Temperature	0°C~60°C
Storage Temperature	-20°C~80°C
Dimensions	338.5 (L) x126.39 (W) mm
MTBF	Over 100,000 hours at 40°C
Miscellaneous	Super I/O - ITE IT5121E-I-128, Watchdog Timer, Hardware Monitoring
Format	PICMG 1.3

Ordering Guide
ROBO-8114VG2AR	Packed with installation CD, dual head COM port cable with bracket, DVI-D + VGA cable, PICMG SBC Handling and Installation Notice SATA III cable. Optional: USB 3.0 cable with bracket, PS/2 Keyboard / Mouse Cable with bracket, USB port cable with bracket.