| Specification | |
|---|---|
| Form Factor | 2.5 inch |
| Interface | SATA III (6.0Gb/s) |
| Flash Type | 3D-TLC |
| Capacity | 128 GB up to 2TB |
| Sequential Read/Write | Read: up to 550 MB/s Write: up to 510 MB/s |
| 4K Random Read/Write | Read: > 47,500 IOPS Write: > 77,500 IOPS |
| Mean Time Between Failures (MTBF) | 3,000,000 hour(s) |
| Drive Writes Per Day (DWPD) | 0.71 (3yrs) *DWPD is calculated based on a 3-year lifetime |
| Terabytes Written (TBW) | Up to 3,300 TB *TBW might vary depending on flash configuration and platform |
| Error Correction Code (ECC) | LDPC / RAID ECC Low density parity check code (>120 bits/Kbytes) |
| Power Consumption | Active mode: ≤ 1,900mW Idle mode: ≤ 215 mW |
| Advanced Wear Leveling | Support |
| Bad Block Management | Support |
| TRIM | Support |
| S.M.A.R.T | Support |
| Over-Provision | Support |
| Firmware Update | Support |
| SmartZIP™ | Support |
| TCG OPAL | Support (Optional) |
| Thermal Sensor | Support (External) |
| Data WP/Erase | Support |
| Operating Temperature | -25°C~85°C |
| Storage Temperature | -40°C~85°C |
| Operating Voltage | 5.0 V ± 5% |
| Shock | 1500G G0-p/0.5ms duration |
| Vibration | 20Hz~80Hz/1.52mm 80Hz~2000Hz/20Gp-p |
| Humidity | Storage: 5%~93% |
| Dimension | 100.00 (L) x 69.85 (W) x 7.00 (H) mm (3.94” x 2.75” x 0.28”) |
| Weight | 45~51g |
| Certification | CE / FCC / BSMI / VCCI |
| Warranty | 3-Year Limited Warranty |
| Ordering Guide | |
|---|---|
| GSD25ST128G | GSD25ST 2.5-inch SATA SSD | 128GB |
| GSD25ST256G | GSD25ST 2.5-inch SATA SSD | 256GB |
| GSD25ST512G | GSD25ST 2.5-inch SATA SSD | 512GB |
| GSD25ST1T | GSD25ST 2.5-inch SATA SSD | 1TB |
| GSD25ST2T | GSD25ST 2.5-inch SATA SSD | 2TB |
| GSD25STW128G | GSD25ST 2.5-inch SATA SSD | 128GB (Wide Temp.) |
| GSD25STW256G | GSD25ST 2.5-inch SATA SSD | 256GB (Wide Temp.) |
| GSD25STW512G | GSD25ST 2.5-inch SATA SSD | 512GB (Wide Temp.) |
| GSD25STW1T | GSD25ST 2.5-inch SATA SSD | 1TB (Wide Temp.) |
| GSD25STW2T | GSD25ST 2.5-inch SATA SSD | 2TB (Wide Temp.) |
