350W PS/2 Industrial Power Supply ATX

*Status: EOL


  • Meets ATX 12V V2.3 standard
  • Dual forward converter design
  • Active PFC (power factor correction) > 0.99
  • Double independent +12V output
  • Power efficiency: 25°C and 50°C can meet the minimum efficiency 80% for all loading conditions at 20%, 50% and 100%
  • Leakage current: Less 3.5 mA-rms at 264Vac, 60 Hz
  • Japan made capacitor (RUBYCON)
  • Fan Control (Internal 80mm fan)
  • Remote ON/OFF Control
  • Hold-up Time in 16ms
  • Power Good signal: TTL compatible on delay 100ms to 500ms

For most PS/2 ATX in IPC applications are for server station and communication system; In those environments, heat is the major cause of output de-rating. PLUTO-D3501PJ also remains 80% derating output at 50°C which allows the whole system to work in high temperature environment. In addition, for various demands, PLUTO-D3501PJ provides dual +12V output for different devices. In order to ensure the output of PLUTO-D3501PJ is stable and reliable, it has dual forward converter design and RUBYCON high quality Japanese capacitor, thus it has shown high performance at 50°C, 12 hours at 100% loading Burn-in test. PLUTO-D3501PJ has 80PLUS certification which helps to reduce energy consumption, and hence to save cost of electricity.

Input Voltage90V~264V AC
Input Frequency50-60Hz
Input Current8A@115V,8A@230V
Holdup Time16 ms, at full load
Over Voltage Protection3.3V@4.8V, 5V@7.0V, 12V@15.6V
Over Current ProtectionOutpout power over 120%~160%
CertificatesCE, CB, FCC, VCCI, UL, TUV, 80PLUS
Risetime10 ms.
MTBF100.000 Hours at 100% loading
Storage Temperature-40°C ~ 70°C, 10% ~ 95% (non-condensing)
Operating Temperature5°C ~ 50°C, 20% ~ 85% (non-condensing)
Dimensions150 x 140 x 85mm

Ordering Guide
PLUTO-D3501PJ350W PS/2 ATX PSU with active PFC Japan made capacitor 80 PLUS and SCP, OCP,OPP

Related Products




44200 Christy Street,
Fremont, CA 94538 USA
+1 510-403-3399