More specifically, the PNSR-5001 supports three OCP NIC 3.0 expansion slots, with two slots supporting PCIe Gen4 x16 from CPU, and the other supporting PCIe Gen3 x8 from HSIO. All three OCP NIC 3.0 slots are compatible with OCP NIC 3.0 (SFF/TSFF) off-the-shelf network adapters. Each OCP NIC 3.0 slot has an independent SMBus and USB 2.0. With Portwell’s proprietary PNC series of network adapters, PNSR-5001 can enable Ethernet Bypass function by application-centric request.
Equipped with one of the most mainstream BMC chips, the AST2500 on-board, PNSR-5001 provides rich I/O elements, including a console port, two USB 3.2 Gen 1 ports, three USB 2.0 headers on-board, and an LCD display module with control buttons. The I/O interface also contains two LEDs for PSU power status and storage drive (HDD) status. Additionally, the PNSR-5001 supports two SATA 3.0 for 2.5” hard drives, one on-board M.2 M key, one M.2 B key for cellular modules, and one M.2 E key for WiFi module.
[White Paper] Building Fail-safe Networks upon Open-Standard Network Security Appliance with Built-in Bypass
[Watch a 3-minute Video Showcasing PNSR-5001]
| Specification | |
|---|---|
| Form Factor | 1U 19" Rackmount |
| CPU | Intel® Xeon® D-2800/D-2700 Series Processors Up to 22 cores, 135W TDP |
| BIOS | AMI Aptio® V UEFI BIOS |
| IPMI | AST2500 BMC Firmware: AMI |
| System Memory | Total 8 DIMMs (2DPC) (1DPC) 4x DDR4 3200MHz ECC LRDIMM, up to 512GB (2DPC) 8x DDR4 3200MHz ECC RDIMM, up to 512GB |
| Expansion | OCP NIC 3.0 slots (extended depth): - 2x PCIe Gen4 x16 from CPU - 1x PCIe Gen3 x8 from HSIO M.2: - 1x M.2 Key B 3052 socket with dual SIM card slots (PCIe, SATA, USB) - 1x M.2 Key E 2230 socket (PCIe) |
| Ethernet Ports | 4x 10/25GbE SFP+/SFP28, Max 100Gbps throughput 1x GbE RJ45 MGMT via Intel® Ethernet Controller I210 1x GbE RJ45 IPMI |
| Storage | 2x 2.5” SATA 3.0 HDD/SSD 1x M.2 Key M 2280 socket (NVMe) |
| Power Supply | 600W Redundant AC Power Supply AC 100V-240V @47Hz-63Hz |
| Cooling | CPU: Passive heatsink System: 5x fans |
| Security | Onboard TPM 2.0 |
| OS Support | Linux |
| Dimension | 435mm (W) x 524mm (D) x 44.34mm (H) 17.13" (W) x 20.63" (D) x 1.75" (H) |
| Serial Port | 1x RJ45 Console port |
| USB | 2x USB 3.2 Gen 1 ports, Type A 3x USB 2.0 headers onboard |
| LCD Panel | (Optional) 2x16 characters, 4x keypads |
| Display | 1x VGA header at rear I/O |
| LED | Power/HDD LEDs |
| Power | Front: 1x Power button 1x Reset button Rear: 2x AC/DC power inlets (select models) |
| Operating Environment | 0°C to 40°C (32°F to 104°F ) |
| Storage Environment | -20°C to 70°C (-4°F to 158°F) |
| Humidity | 5% to 95% RH, non-condensing |
| Certification | CE/FCC Compliance |
| Ordering Guide | |
|---|---|
| 510-24-0020 | PNSR-5001 Chassis with LCM, 600W RPSU, Heatsink |
| PNC Series NICs | Portwell-designed PNC series of OCP NIC 3.0 network adapters (Bypass function available via select SKUs) |
